3D PRINTER BAMBULAB H2D
3D PRINTER BAMBULAB H2D
3DEXPERT OFFICIAL DEALER OF BAMBULAB
3D PRINTER BAMBULAB H2D
3D PRINTER BAMBULAB H2D
3DEXPERT OFFICIAL DEALER OF BAMBULAB

Μοναδική ποιότητα, μοναδική ταχύτητα! Ο εκτυπωτής που άλλαξε το status στο FDM!

Κωδικός: P120

Εταιρεία: BAMBULAB

Γράψτε πρώτος μια αξιολόγηση για αυτό το προϊόν!

1.999,00€ 1.999
Συμπεριλαμβάνεται ο Φ.Π.Α

Δωρεάν μεταφορικά για παραγγελίες άνω των 49,00€ και για επιλεγμένα προϊόντα (ισχύει για Ελλάδα)!

Διαθεσιμότητα: Αναμένεται στις 25/06/2025

Ετικέτες: 3d printer, bambulab,

Διαθέσιμες Επιλογές

PACK:



      Αγορά Στη Λίστα Επιθυμιών
Το προϊόν προστέθηκε με επιτυχία στο καλάθι

      Share:

Περιγραφή

Το νέο μοντέλο της BambuLab που όλοι περιμέναμε ήρθε πλήρως ανανεωμένο, μεγαλύτερο, ταχύτερο και με πολλά νέα features! Θα το βρείτε στο 3DEXPERT, επίσημο μεταπωλητή BambuLab στην Ελλάδα!

  • Dual-nozzle Multi-material 3D Printing
  • Optional 10W/40W Laser and Cutting Module
  • 350*320*325 mm³ Print Volume - (Single Nozzle 325x320x325mm , Dual Nozzle 300x320x325mm)
  • 5μm Resolution Optical Motion Calibration
  • Closed-loop Servo Extruder
  • 350°C Nozzle & 65°C Active Chamber Heating

Loading video...

 

  • Printing Technology Fused Deposition Modeling
  • Body Build Volume (W*D*H) Single Nozzle Printing: 325*320*325 mm³
  • Dual Nozzle Printing: 300*320*325 mm³
  • Total Volume for Two Nozzles: 350*320*325 mm³
  • Chassis & Shell Aluminum, Steel, Plastic and Glass
  • Laser Safety Windows Equipped on Laser Edition, normal H2D can upgrade through Laser Upgrade Kit
  • Air Assist Pump Equipped on Laser Edition, normal H2D can upgrade through Laser Upgrade Kit
  • Physical Dimensions Physical Dimensions 492*514*626 mm³
  • Net Weight 31 kg
  • Toolhead Hotend All Metal
  • Extruder Gear Hardened Steel
  • Nozzle Hardened Steel
  • Max Nozzle Temperature 350 °C
  • Included Nozzle Diameter 0.4 mm
  • Supported Nozzle Diameter 0.2 mm, 0.4 mm, 0.6 mm, 0.8 mm
  • Filament Diameter 1.75 mm
  • Extruder Motor Bambu Lab High-precision Permanent Magnet Synchronous Motor
  • Heatbed Supported Build Plate Type Textured PEI plate, Smooth PEI Plate
  • Max Heatbed Temperature 120 ℃
  • Speed Max Speed of Toolhead 1000 mm/s
  • Max Acceleration of Toolhead 20,000 mm/s²
  • Max Flow for Hotend (Standard Flow Hotend) 40 mm³/s(Test parameters: 250 mm round model with a single outer wall Bambu Lab ABS; 280 °C printing temperature)
  • Max Flow for Hotend (Optional High Flow Hotend) 65 mm³/s(Test parameters: 250 mm round model with a single outer wall Bambu Lab ABS; 280 °C printing temperature)
  • Chamber Temperatur Control Active Chamber Heating Supported Max Temperature 65 °C
  • Air Purification Pre-filter Grade G3
  • HEPA Filter Grade H12
  • Activated Carbon Filter Type Granulated Coconut Shell
  • Cooling Part Cooling Fan Closed Loop Control
  • Auxiliary Part Cooling Fan Closed Loop Control
  • Chamber Heat Circulation Fan Closed Loop Control
  • Cooling Fan for Hotend Closed Loop Control
  • Main Control Board Fan Closed Loop Control
  • Chamber Exhaust Fan Closed Loop Control
  • Supported Filament Type PLA, PETG, TPU, PVA, BVOH, ABS, ASA, PC, PA, PET, Carbon/Glass Fiber Reinforced PLA, PETG, PA, PET, PC, ABS, ASA, PPA CF/GF, PPS, PPS CF/GF Supported
  • Sensor Live View Camera Built-in; 1920*1080
  • Nozzle Camera Built-in; 1920*1080
  • BirdsEye Camera Built-in; 3264*2448(Equipped with Laser Edition)
  • Toolhead Camera Built-in; 1920*1080
  • Door Sensor Supported
  • Filament Run Out Sensor Supported
  • Filament Tangle Sensor Supported
  • Filament Odometry Supported with AMS
  • Power Loss Recovery Supported
  • Electrical Requirements Voltage 100-120 VAC / 200-240 VAC, 50/60 Hz
  • Max Power* 2200 W@220 V / 1320 W@110 V
  • Average Power 1050 W@220 V / 1050 W@110 V
  • Electronics Touchscreen 5-inch 720*1280 Touchscreen
  • Storage Built-in 8 GB EMMC and USB Port
  • Control Interface Touchscreen, mobile App, PC App
  • Neural Processing Unit 2 TOPS
  • Software Slicer & Software Bambu Studio, Bambu Suite, Bambu Handy
  • Supports third-party slicers which export standard G-code, such as Super Slicer, PrusaSlicer and Cura, but certain advanced features may not be supported.
  • Supported Operating System MacOS, Windows
  • Wi-Fi Operating Frequency 2412-2472 MHz, 5150-5850 MHz (FCC/CE)
  • 2400-2483.5 MHz, 5150-5850 MHz (SRRC)
  • Wi-Fi Transmitter Power (EIRP) 2.4 GHz: <23 dBm (FCC); <20 dBm (CE/SRRC/MIC)
  • 5 GHz Band1/2: <23 dBm (FCC/CE/SRRC/MIC)
  • 5 GHz Band3: <30 dBm (CE); <24 dBm (FCC)
  • 5 GHz Band4: <23 dBm (FCC/SRRC); <14 dBm (CE)
  • Wi-Fi Protocol IEEE 802.11 a/b/g/n
  • 10W & 40W
  • Laser Module Laser Type Semiconductor Laser
  • Laser Wavelength Engraving Laser: 455 nm ± 5 nm Blue Light
  • Height Measuring Laser: 850 nm ± 5 nm Infrared Light
  • Laser Power 10 W ± 1 W; 40 W ± 2 W
  • Laser Spot Dimension 10W: 0.03 mm * 0.14 mm; 40W: 0.14 mm * 0.2 mm
  • Working Temperature 0 °C–35 °C
  • Max Engraving Speed 10W: 400 mm/s; 40W: 1000 mm/s
  • Max Cutting Thickness 10W: 5 mm; 40W: 15mm (Basswood Plywood)
  • Laser Safety Class for Laser Module Class 4
  • Overall Laser Safety Class* Class 1
  • Engraving Area 10W: 310 mm * 270 mm; 40W: 310 mm * 250 mm
  • XY Positioning Accuracy < 0.3 mm
  • Z Height Measuring Method Micro Lidar
  • Z Height Measuring Accuracy ± 0.1 mm
  • Flame Detection Supported
  • Temperature Detection Supported
  • Door Sensor Supported
  • Laser Module Installation Detection Supported
  • Safety Key Included
  • Ventilation Pipe Adapter Outer Diameter 100 mm
  • Supported Material Type Wood, rubber, metal sheet, lether, dark acrylic, stone, and more
  • Cutting Module Cutting Area 300*285 mm²
  • Drawing Area 300*255 mm²
  • Supported Pen Diameter 10.5 mm-12.5 mm
  • Cutting Mat Type LightGrip and StrongGrip Cutting Mats
  • Blade Type 45°*0.35 mm
  • Blade Pressure Range 50 gf-600 gf
  • Max Cutting Thickness 0.5 mm
  • Blade and Pen Recognition Supported
  • Cutting Mat Type Detection Supported
  • Supported Image Type Bitmap and Vector Images
  • Supported Material Type Paper, vinyl, leather, and more

Χαρακτηριστικά

Αξιολογήσεις προϊόντος (0)

 
Εταιρείες
 
3Dexpert.gr © 2025. All rights reserved. Designed & Developed with care by TotalWeb®
PayPal Eurobank Cards   
Comodo Secure Seal

Έλαβα ΓνώσηΣτον διαδικτυακό μας τόπο χρησιμοποιούμε cookies για να σας προσφέρουμε μια πιο εξατομικευμένη εμπειρία.
Επιλογές cookies | Διαβάστε περισσότερα...